M.Eng.Master · Master of Engineering
Sustainable Printing, Packaging and Processing (M.Eng.)
Sustainable Printing, Packaging and Processing
Hochschule für Technik, Wirtschaft und Kultur LeipzigLeipzig
Planned
- Standard duration
- 3 semesters90 ECTS · Full-time
- Language
- German
- Start
- Summer semester
- Apply by
- 15 January 2027Summer semester · 59 days left
- Admission (NC)
- Restrictedlocal NC or selection procedure
- Tuition fees
- NoneSemester fee €333.20
on htwk-leipzig.de
Information from htwk-leipzig.de · checked 27 October 2026 · All details and sources
What will I learn?
Semester plan
- Required
- Thesis
Semester 120 ECTS required · 6 required electivesChange Management (Veränderungsmanagement) · Fluide und Grenzflächen · Kreislaufwirtschaft · Nachhaltige Material-, Produkt- und Prozessentwicklung - Produktentwicklung · 6 required electives from the elective areas below
- Change Management (Veränderungsmanagement)Summary by OWWZ: Study individual and organizational change, change leadership and the methods and tools used to manage change.summer semester only5 ECTS
- Fluide und GrenzflächenSummary by OWWZ: Study fluid behavior, surfaces and interfaces, and processes for treating printing and packaging materials.summer semester onlyExam (in German): Klausur 90 Min.5 ECTS
- KreislaufwirtschaftSummary by OWWZ: Examine circular strategies, material and energy cycles, polymer chemistry, recycling and environmental assessment of printing and packaging processes.summer semester onlyExam (in German): Präsentation 20 Min.5 ECTS
- Nachhaltige Material-, Produkt- und Prozessentwicklung - ProduktentwicklungSummary by OWWZ: Design sustainable products and packaging in an interdisciplinary group project, including material selection and construction.summer semester onlyExam (in German): Präsentation 20 Min.5 ECTS
Semester 225 ECTS required · 3 required electivesIngenieursprojekt · Kostenmanagement · Nachhaltige Material-, Produkt- und Prozessentwicklung - Prozessentwicklung · Projektmanagement und Personalführung · Research Project (Forschungsprojekt) · 3 required electives from the elective areas below
- IngenieursprojektSummary by OWWZ: Develop printing and packaging technology projects from analysis and design to prototypes, programming and documentation.winter semester only5 ECTS
- KostenmanagementSummary by OWWZ: Study cost accounting and management, including process costs, life-cycle costing and sustainability.winter semester onlyExam (in German): Klausur 90 Min.5 ECTS
- Nachhaltige Material-, Produkt- und Prozessentwicklung - ProzessentwicklungSummary by OWWZ: Develop sustainable production processes and production plans for previously designed printing and packaging products in a team project.winter semester onlyExam (in German): Präsentation 20 Min.5 ECTS
- Projektmanagement und PersonalführungSummary by OWWZ: Apply competence-based project and personnel management, including objectives, risk analysis, agile methods and practical planning.winter semester onlyExam (in German): Hausarbeit 10 Wochen und Präsentation 20 Min., je 50 %5 ECTS
- Research Project (Forschungsprojekt)Summary by OWWZ: Independently research, plan and conduct experimental work, then evaluate, document and present the results.winter semester only5 ECTS
Semester 330 ECTS requiredMastermodul
- Mastermodul (Thesis)Summary by OWWZ: Independently solve a complex subject-related problem using scientific methods, document it and defend the results.summer semester only30 ECTS
Plus elective areas without a fixed semester, 15 ECTS in total (below); they are not included in the semester bars.
- 19modules in the plan
- 10required modules
- 1elective area
- 30 ECTSThesis
Elective areas
Wahlpflichtmodulechoose 15 ECTS · 9 modulesModellierung · Beschichtungsverfahren für 2D- und 3D-Anwendungen · Spezielle Probleme der Logistik …
- ModellierungSummary by OWWZ: Model technical processes using mathematical and experimental methods, simulation and numerical methods applied to printing and packaging.summer semester only5 ECTSRequired elective
- Beschichtungsverfahren für 2D- und 3D-AnwendungenSummary by OWWZ: Study the physicochemical principles and technical methods of surface coating, including practical investigation of coating processes.summer semester only5 ECTSRequired elective
- Spezielle Probleme der LogistikSummary by OWWZ: Study business logistics and supply chain management, including models and methods for analyzing and solving logistics problems.summer semester onlyExam (in German): Hausarbeit 14 Wochen und Präsentation 20 Min., je 50 %5 ECTSRequired elective
- Innovationen Druck und VerpackungSummary by OWWZ: Discuss current printing and packaging research and innovations through expert contributions and student project proposals.summer semester only5 ECTSRequired elective
- PackmittelherstellungSummary by OWWZ: Study packaging production processes and technical principles including cutting, forming, coating and joining.summer semester onlyExam (in German): Mündliches Fachgespräch 20 Min.5 ECTSRequired elective
- UmweltanalytikSummary by OWWZ: Study environmental analysis of pollutants from printing and packaging materials, including sampling, preparation and chromatography.summer semester onlyExam (in German): Mündliches Fachgespräch 20 Min.5 ECTSRequired elective
- FälschungssicherheitSummary by OWWZ: Study product, brand and document protection, including cryptography, forgery types and protective technologies.winter semester only5 ECTSRequired elective
- Polymer Additive Manufacturing (ERASMUS: Blended Intensive Programme)Summary by OWWZ: Study polymer additive manufacturing, including design, simulation, material selection, testing, printing and post-processing.winter semester onlyExam (in German): Projektarbeit 3 Wochen (70 %) und Hausarbeit 1 Monat (30 %)5 ECTSRequired elective
- Statistische Analyseverfahren in Data ScienceSummary by OWWZ: Apply multivariate statistical analysis, including correlation, hypothesis tests, regression and analysis of variance.winter semester only5 ECTSRequired elective
Topic profile
- Print and packaging technology6 ECTS: 4 required, 2 elective
- Management accounting and controlling5 ECTS: 5 required
- Leadership5 ECTS: 5 required
- Organisation and change management5 ECTS: 5 required
- Surface engineering and corrosion4 ECTS: 3 required, 1 elective
- Product development4 ECTS: 4 required
- Circular economy and waste management3 ECTS: 3 required
- Sustainability3 ECTS: 3 required
Curriculum sources
1 document- Studien- und Prüfungsordnung (vom 29. Januar 2026, gilt ab Sommersemester 2027) (PDF, nicht barrierefrei)Examination regulations · Version 29. Januar 2026; gilt ab Sommersemester 2027 · checked 26 October 2026
Application and requirements
Application deadlines
Summer semester
until 15 January 2027
from 1 December 2026
59 days left
Source: htwk-leipzig.de
Requirements
Admission
Restricted admissionlocal NC or selection procedure
Checklist to tick off
Researched: 27 October 2026. Deadlines and fees change; the university is authoritative.
Costs
- Tuition fees
- None
- Semester contribution
- €333.20 per semesterfor all students at the university
Source: htwk-leipzig.de · checked 30 September 2026
Over the standard duration
- Semester contributions: 3 × €333.20 = €999.60
Calculated by OWWZ from the standard duration (3 semesters, 1.5 years) and the amounts above. Contributions usually change every semester; living costs are not included.
Further fees according to the university
Tuition fees
Studiengebühren an staatlichen Hochschulen
- Tuition fees
- none
State · Conditions per source: revosax.sachsen.de · checked 26 October 2026
Degree and next steps
Degree
Master of Engineering (M.Eng.)Consecutive master
Fits these goals
- Run a business25 ECTS in matching modules
- Business and economics25 ECTS in matching modules
Similar programmes
Programmes with a similar curriculum
Management und Führung M.A.
HAWK Hochschule für angewandte Wissenschaft und KunstHolzminden
- 6 semesters
- Part-time, Part-time alongside work
- Starts in winter and summer
- German
- no NC
- no tuition fees
Shared topics: Business administration, Management accounting and controlling, Leadership, Organisation and change management, SustainabilityVerpackungstechnologie B.Eng.
Duale Hochschule Baden-WürttembergGernsbach
- 6 semesters
- Dual study, Full-time
- Starts in winter
- German and English
- Restricted
- no tuition fees · non-EU €1,500/semester
Shared topics: Business administration, Print and packaging technology, Circular economy and waste management, Surface engineering and corrosion, Product developmentTechnisches Produktmanagement - Technisches Design B.Eng.
Hochschule der Medien StuttgartStuttgart
- 7 semesters
- Full-time
- Starts in winter and summer
- German and English
- Restricted
- no tuition fees · non-EU €1,500/semester
Shared topics: Business administration, Print and packaging technology, Surface engineering and corrosion, Product development, Management accounting and controlling
Printing and reproduction technology elsewhere4 programmes
Transformation Design & Print M.Eng.
Berliner Hochschule für TechnikBerlin
- 4 semesters
- Full-time, Part-time
- Starts in winter
- German
- Restricted
- no tuition fees
Packaging Technology and Management M.Eng.
Berliner Hochschule für TechnikBerlin
- 3 semesters
- Full-time
- Starts in winter and summer
- German
- no NC
- no tuition fees
Druck- und Medientechnik M.Ed.Teacher trainingCombination subject
Bergische Universität WuppertalWuppertal
- 4 semesters
- Full-time
- Starts in winter and summer
- no NC
- no tuition fees
Digital Media & Print B.Eng.
Berliner Hochschule für TechnikBerlin
- 6 semesters
- Full-time
- Starts in winter and summer
- German
- Restricted
- no tuition fees
More programmes at this university4 programmes
Energy, Building Services and Environmental Engineering M.Eng.
Leipzig
- 4 semesters
- Full-time
- Starts in winter
- German
- Restricted
- no tuition fees
Mechanical Engineering (M.Eng.) M.Eng.
Leipzig
- 4 semesters
- Full-time
- Starts in winter
- German
- Restricted
- no tuition fees
Industrial Engineering - Mechanical and Energy Engineering (M.Sc.) M.Sc.
Leipzig
- 4 semesters
- Full-time
- Starts in winter
- German
- Restricted
- no tuition fees
Energie-, Gebäude- und Umwelttechnik B.Eng.
Leipzig
- 6 semesters
- Full-time
- Starts in winter
- German
- Restricted
- no tuition fees
All details and sources
- Degree
- Master of Engineering (M.Eng.)Consecutive master
- Standard duration
- 3 semesters
- ECTS credits
- 90 ECTS
- Start of studies
- Summer semester
- Mode of study
- Full-time
- Teaching language
- German
- Admission
- Restricted admission
- Location
- Leipzig
- Tuition fees
- No tuition feesSource: htwk-leipzig.de
- Semester contribution
- €333.20 per semesterfor all students at the universitySource: htwk-leipzig.de
- Subject (official classification)
- Printing and reproduction technology, Textile and clothing technology, Environmental engineering (including recycling)
- Status
- Planned
Information from htwk-leipzig.de · checked 27 October 2026
Report an error
University
Hochschule für Technik, Wirtschaft und Kultur Leipzig
University of applied sciences · Public
Leipzig, Saxony